Willy Bain's Bicycle Repair - Tel: 0141 423 9010

Gear Service - £7.50 each

  • Check system for reported faults
  • Check operation on stand
  • Measure chain wear and check length
  • Check pulley wheels for wear
  • Check lever, adjust and lubricate as necessary
  • Remove inner wires, steel wool then grease and replace
  • Check condition of outers and trim as necessary
  • Replace end caps
  • Check dropout alignment
  • Set limit stop screws on rear mech
  • Adjust cable tension
  • Align front mech and adjust for height
  • Set limit stop screws on front mech
  • Adjust cable tension
  • Fine-tune both mechanisms’ operation
Protx SecurityAll Major Credit Cards Accepted
All Major Credit Cards Accepted Copyright 2005 bicyclerepair.co.uk